China hydraulic brick making machines Manufacturer, Supplier, Factory

The brick machine pallet is an auxiliary equipment that holds up the brick embryos during the production process of the brick machine. Brick machine pallets are divided into fiberglass brick machine pallets, fiberglass brick machine pallets, solid wood brick machine pallets, bamboo brick machine pallets, plastic brick machine pallets, and steel brick machine pallets according to different materials. Rubber brick machine pallets, composite brick machine pallets, etc.

Brick machine curing kiln is a facility for normal pressure wet heat curing or pressureless steam curing of concrete products. It can be divided into two types: intermittent brick machine curing kiln and continuous brick machine curing kiln. The first type is brick machine curing pit, brick machine curing room, etc., where products are put into the kiln for curing in batches, and the heating, constant temperature and cooling are controlled by the amount of steam introduced, which is suitable for the production process of the water unit method; tunnel brick machine curing kiln, folding line brick machine curing kiln, vertical brick machine curing kiln, etc., products are continuously put into the kiln from one end, and after the three sections of heating, constant temperature and cooling, they are discharged from the other end, which is suitable for the production process of the water conveyor belt method.

The HP-600T large-format static press adopts a high-pressure hydraulic molding process, achieving cement-aggregate compression molding through press filtration. The equipment is easy to operate, features low production costs, and represents an advanced production system for PC imitation stone bricks.

QGM ZN1000C-2 with a pallet size of 1200x950mm, it is the machine that is designed in Germany ZENITH and made in China, it has 4 Servo motors on the table and two Italian motors on the top, thus completely guaranteeing the resistance of the entire Single Pallet Machine.
There are 2 airbags on each side, 4 in total. The mold base is fixed by inflating the airbag and tightening the fixed base and the top of the tamper is also equipped with a pneumatic locking device, which can change the mold faster within 20 min.
The electronic components are used by international brands, Siemens, and for the steel that is connected to concrete, the HARDOX brand from Sweden is used. In addition, the oil pipes and valves of the hydraulic system are used by Italian brands, etc.

The ZN1200-2S Fully Automatic Block Making Machine is the latest state-of-the-art intelligent production equipment developed by Zenith. It is capable of producing a wide range of standard concrete products such as hollow blocks, paving stones, curbstones, and solid bricks, as well as various non-standard special products and landscaping elements—meeting virtually all customer requirements.
The ZN1200-2S is also equipped with a variety of advanced intelligent systems and devices, including the latest control and automatic diagnostic systems and a servo vibration system, ensuring efficient, precise, and intelligent production performance.

‌‌Concrete Brick Machine Equipment is a brick-making machine used to produce bricks, mainly using cement concrete as raw material. This equipment scientifically proportions raw materials (such as slag, slag, fly ash, stone powder, sand, gravel, cement, etc.), adds water and stirs, and finally produces cement bricks, hollow blocks or colored pavement bricks through high-pressure pressing.