China concrete brick making machinery Manufacturer, Supplier, Factory

Brick machine curing kiln is a facility for normal pressure wet heat curing or pressureless steam curing of concrete products. It can be divided into two types: intermittent brick machine curing kiln and continuous brick machine curing kiln. The first type is brick machine curing pit, brick machine curing room, etc., where products are put into the kiln for curing in batches, and the heating, constant temperature and cooling are controlled by the amount of steam introduced, which is suitable for the production process of the water unit method; tunnel brick machine curing kiln, folding line brick machine curing kiln, vertical brick machine curing kiln, etc., products are continuously put into the kiln from one end, and after the three sections of heating, constant temperature and cooling, they are discharged from the other end, which is suitable for the production process of the water conveyor belt method.

QGM Block Machine, a reputable manufacturer in China, is willing to offer you Block Making Machine. We promise to provide you with the best after-sale support and prompt delivery. The Vertical Brick Mixer is driven by a mixing motor to drive the planetary gear reducer, which drives the reducer housing to revolve through the internal gears. The 1-2 sets of planetary arms on the reducer rotate on their own, so that the mixer can rotate 360° without dead angles and mix the materials quickly and evenly with high quality. Different clamps and materials can be used to meet the use of a wide range of mixing materials.

QGM ZN1000C-2 with a pallet size of 1200x950mm, it is the machine that is designed in Germany ZENITH and made in China, it has 4 Servo motors on the table and two Italian motors on the top, thus completely guaranteeing the resistance of the entire Single Pallet Machine.
There are 2 airbags on each side, 4 in total. The mold base is fixed by inflating the airbag and tightening the fixed base and the top of the tamper is also equipped with a pneumatic locking device, which can change the mold faster within 20 min.
The electronic components are used by international brands, Siemens, and for the steel that is connected to concrete, the HARDOX brand from Sweden is used. In addition, the oil pipes and valves of the hydraulic system are used by Italian brands, etc.

Fully Automatic Block Machine is a fully automatic block equipment that uses slag, slag, fly ash, stone powder, sand, gravel, cement, etc. as raw materials to press high-pressure blocks or bricks. The classic vibration mode of the Fully Automatic Block Machine is particularly suitable for the production of high-strength blocks, standard bricks, etc.

The ZN900-2 Block Making Machine Fully Automatic is the latest top-tier intelligent production equipment developed by Zenith. It can produce various standard concrete products such as hollow blocks, paving stones, curbstones, solid bricks, as well as a wide range of non-standard special products and landscaping products—virtually meeting all customer requirements.
The ZN900-2 is also equipped with several cutting-edge intelligent systems and devices, such as the latest control and automatic diagnostic systems and a servo vibration system.

You can rest assured to buy Block Making Machine from QGM factory and we will offer you the best after-sale service and timely delivery. Brick Manufacturing Machine is a mechanical equipment for manufacturing and producing bricks. Brick making machine is the general name for all machines that produce wall bricks and pavement bricks. It is mainly divided into three types: vibration molding, hydraulic molding and hydraulic vibration combined molding. Machinery that generally uses stone powder, fly ash, slag, slag, gravel, sand, water, etc. to add cement as raw materials through hydraulic power, vibration power, pneumatic power, etc. to produce bricks.