1. The material storage hopper of the unburned brick machine should be used as soon as it is received because the cement board is easy to condense into blocks, and it is not suitable to store it for too long.
2. Pay attention to the loading and feeding. There should be no large-sized aggregates or other foreign objects mixed in the mixing bucket, especially solid objects such as iron parts, which can easily damage the machine parts.
3. Check whether the brick connection plate is clean. If the sticky blocks are found, they must be shoveled away before they can be sent to the bottom plate warehouse of the forming machine.
4. The vibration and pressing time should be strictly controlled. If necessary, the feeding amount can be adjusted. At any time, pay attention to whether the limit of each process is normal and whether the screws are loose. If there is an accident, stop the machine and adjust it in time.
5. If the sliding sleeve and the column are excessively worn, the alloy sleeve should be replaced to ensure that the gap between the mold box and the four sides of the pressure head is roughly even and the demolding is smooth.
6. The bottom plate of the feed hopper should be kept consistent with the mold plane. It should be checked and adjusted after a certain period of use. After the feed hopper is returned, it can scrape back the remaining material and clean the sticky material on the surface of the pressure head. The upper and lower scrapers should be adjusted well and replaced in time if they are excessively worn.
